Technical Data Sheet & Product Information
keep-racing® DOT 5.1 – High-performance brake fluid for karting & motorsport
Technical Data
| Specification / Standard | DOT 5.1 · FMVSS 116 · ISO 4925 |
| Dry boiling point (ERBP) | 275 °C (min. 260 °C) |
| Wet boiling point (Wet ERBP) | 182 °C (min. 180 °C) |
| Viscosity at −40 °C | 865 mm²/s (max. 900) |
| Viscosity at 100 °C | 2,0 mm²/s |
| pH value | 7,5 |
| Density at 20 °C | 1,070 g/cm³ |
| Colour | hellgelb |
Application
High-quality hydraulic brake fluid for brake and clutch systems in karting and motorsport. Do not mix with mineral-oil or silicone-based fluids (DOT 5). Brake fluid is hygroscopic – reseal the container immediately after use and replace regularly.
Safety Information (CLP / GHS)
Signal word: Warning
H361 – Suspected of damaging fertility or the unborn child.
P201 Obtain special instructions before use. · P280 Wear protective gloves/clothing/eye/face protection. · P308+P313 IF exposed or concerned: Get medical advice/attention. · P405 Store locked up. · P501 Dispose of properly.
Documents (PDF)
📥 Technical Data Sheet (TDS)📥 Safety Data Sheet (SDS)
Technical values: typical data, not a guaranteed specification. Binding safety information: see Safety Data Sheet.
keep-racing Schnermann GmbH · Trafoweg 2, 52152 Simmerath, Germany · shop@keep-racing.de