Technical Data Sheet & Product Information
keep-racing® DOT 4 – High-performance brake fluid for karting & motorsport
Technical Data
| Specification / Standard | DOT 4 · FMVSS 116 · ISO 4925 |
| Dry boiling point (ERBP) | 240 °C (min. 230 °C) |
| Wet boiling point (Wet ERBP) | 160 °C (min. 155 °C) |
| Viscosity at −40 °C | 1.660 mm²/s (max. 1.800) |
| Viscosity at 100 °C | 2,15 mm²/s |
| pH value | 7,4 |
| Density at 20 °C | 1,07 g/cm³ |
| Colour | farblos |
Application
High-quality hydraulic brake fluid for brake and clutch systems in karting and motorsport. Do not mix with mineral-oil or silicone-based fluids (DOT 5). Brake fluid is hygroscopic – reseal the container immediately after use and replace regularly.
Safety Information (CLP / GHS)
Signal word: Warning
H302 – Harmful if swallowed.
P201 Obtain special instructions before use. · P264 Wash hands thoroughly after handling. · P270 Do not eat, drink or smoke when using. · P280 Wear protective gloves/eye protection. · P301+P312 IF SWALLOWED: Call a POISON CENTRE/doctor if you feel unwell. · P330 Rinse mouth. · P405 Store locked up. · P501 Dispose of properly.
Documents (PDF)
📥 Technical Data Sheet (TDS)📥 Safety Data Sheet (SDS)
Technical values: typical data, not a guaranteed specification. Binding safety information: see Safety Data Sheet.
keep-racing Schnermann GmbH · Trafoweg 2, 52152 Simmerath, Germany · shop@keep-racing.de